- Home
- ยป
- Our Products
- »
- Cooling Tower
Cooling Tower
Manufacturer of a wide range of products which include frp square type cooling tower, rectangular frp cooling tower, industrial water cooling tower, high efficient field erected cooling tower and round frp cooling tower.
FRP Square Type Cooling Tower
Get Latest Price
Product Brochure
Product Details:
Usage/Application | Industrial |
Shape | Square |
Motor Power | 5 HP |
Voltage | 415 V |
Frequency | 60 Hz |
Material | FRP |
Country of Origin | Made in India |
Cooling Capacity | 150TR |
Get Best QuoteRequest A Callback
Rectangular FRP Cooling Tower
Get Latest Price
Product Details:
Usage/Application | Industrial |
Shape | Rectangular |
Supply Phase | Three Phase |
Motor Power | 5 HP |
Voltage | 415 V |
Frequency | 60 Hz |
Material | FRP |
Country of Origin | Made in India |
Cooling Capacity | 150TR |
Principle of Cooling Towers : Polo Square type cooling towers operates according to the counter flow principle. The water to be cooled is connected into the tower at the top in main header pipe and is distributed by branch pipes with splash cap (nozzles) with a low pressure drop, and flows down, in the form of a thin water film and small droplets, over the largest possible fill surface for the heat transfer.
The water falls through the fill and is collected in a FRP basin at the bottom of the tower. The atmospheric air is sucked in through the opening for air inlet on all sides at the lower portion of the tower and moves up through the PVC fill. The air moving up cools the falling water. Here the transfer of heat takes place by evaporation and direct contact. The air inlet is covered by PVC Mesh for free flow of air.
Selection of Materials : The selection of materials for the POLO S Series cooling towers is based on the requirement that they must be completely resistant to corrosion and chemicals. This has been achieved through the exclusive use of PVC, polypropylene, fiberglass reinforced polyester (FRP) and hot dipped galvanized steel for supports.
Salient Features :
- Casing, Basin, Fan deck and Fan stack in corrosion-resistant and fire-retardant FRP
- Hot dip galvanized supporting structural.
- Fill material of PVC (max. temp. 60 Degree C).
- High efficient axial flow Fan with Aluminum / FRP blades and cast aluminum alloy hub.
- Drift eliminators of PVC extruded ‘C’ & ’S’ type (drift percentage shall not exceed 0.05 of circulating water flow).
- Water distribution system with PVC pipe and PP splash cap (nozzles).
Advantage :
- Energy efficient - use of high efficient fill, and nozzles with a low pressure drop.
- Durable - use of high quality materials.
- Guaranteed performance - use of PVC fill.
- Aesthetic looks - use of FRP panels.
Get Best QuoteRequest A Callback
Industrial Water Cooling Tower
Get Latest Price
Product Details:
Usage/Application | Industrial |
Supply Phase | Three Phase |
Motor Power | 20 HP |
Water Pressure | 10 Bar |
Voltage | 440 V |
Frequency | 60 Hz |
Material | FRP |
Country of Origin | Made in India |
Cooling Capacity | 200 TR |
Get Best QuoteRequest A Callback
High Efficient Field Erected Cooling Tower
Get Latest Price
Product Details:
Usage/Application | Industrial |
Shape | Rectangular |
Supply Phase | Three Phase |
Motor Power | 40 HP |
Water Pressure | 20 Bar |
Voltage | 440 V |
Frequency | 60 Hz |
Material | Stainless Steel |
Country of Origin | Made in India |
Cooling Capacity | 400 TR |
Get Best QuoteRequest A Callback
Round FRP Cooling Tower
Get Latest Price
Product Details:
Usage/Application | Industrial |
Shape | Round |
Supply Phase | Single Phase |
Motor Power | 5 HP |
Water Pressure | 3 Bar |
Voltage | 415 V |
Frequency | 60 Hz |
Material | FRP |
Country of Origin | Made in India |
Cooling Capacity | 160TR |
We are manufacturing a premium range of Industrial Cooling Tower by using technically advanced mechanism to improve the quality of products like Round FRP Cooling Tower Made from quality approved raw materials, these are known for their compact design, corrosion resistance and ease of maintenance. Our collection is capable to render the varied requirements of various areas such as chemical plants, power stations, oil refineries and building cooling.
Get Best QuoteRequest A Callback