An ISO 9001 : 2008 Certified Company
» Electrostatic Scale Preventer
Electrostatic Scale Preventer
With the assistance of our team of professionals, we
have been able to manufacture and export a large variety of Electrostatic
Scale Preventer-Scale-Off and Hard Water Treatment Plant or System. Our team of professionals conducts different
tests at every stage of production to ensure dimensional accuracy, rigid
construction and corrosion resistance.
Electrostatic Scale Preventer - SCALE OFF
product has win Nobel Prize and is approved by National Physical Laboratory,
New Delhi. It consists Treating Chamber & Control Panel. The former
consists of two elements, one is the cylindrical stainless steel
chamber-Negative Electrode through which the water flows. At the center of
chamber is a core covered dy a dielectric sheath positive electrode. Water
enters the chamber at the bottom and spirals around the core as it travels
upwards to the outlet. When the water passes through the SS chamber the
equilibirium of the hardness causing ions is disturbed due to the high
electrostatic field. This converts the scale forming ions into a non
adhesive type of sludge, the same can be collected at the low velocity zone
(cooling tower basin) and flushed out by blown down or bleed out, as the
case may be.
Other Information :
- Eliminates use of expensive chemicals for descaling.
- Dual action - prevention and removal of existing scales.
- Eliminates corrosion of Chemicals
- No reccuring costs.
- Lower energy consumption pays back in energy saving in less than a
SCALE OFF Tech Preventer :
- Pay Mode Terms : D/P (Documents Against Payment), T/T (Bank Transfer)
- Production Capacity : 12 - 15 units per annum
- Packaging Details : Wooden Crate / Gunny packing
Water Softening Equipment
We are the manufacturers and suppliers of Non-Chemical Water Treatment Plant. This Water Softening equipment do not require any kind of chemical for the removal of scale from hard water. In this equipment, Scale Off part consists of a pipe with a special alloy core inserted inside. The unit comes in different sizes and flanged as required - (see the specifications). In order to prevent scale from forming in a piece of equipment the scale off is installed in the pipe lines which feeds water to it. The secret of its success is found in the core - its shape, its composition and a combination of the pressure changes and turbulence that the special design causes.
The scale off operates as a catalyst using the pH rise generated by the alloy to trigger precipitation of calcium carbonate in the bulk of the water forming stable crystals. This result is a water which has less calcium carbonate in solution and a mass of seed crystals which, should the water then be heated, act as sites for further precipitation in preference to adhering to the hot surfaces - thus protecting them from scale.